Advanced Interconnects for Ulsi Technology

List of Contributors xvii

Preface xxi

List of Abbreviations xxv

Section I Low-k Materials 1

1 Low-k Materials: Recent Advances 3
Geraud Dubois and Willi Volksen

1.1 Introduction 3

1.2 Integration Challenges 5

1.2.1 Process-Induced Damage 6

1.2.2 Mechanical Properties 9

1.3 Processing Approaches to Existing Integration Issues 10

1.3.1 Post-deposition Treatments 11

1.3.2 Prevention or Repair of Plasma-Induced Processing Damage 14

1.3.3 Multilayer Structures 15

1.4 Material Advances to Overcome Current Limitations 16

1.4.1 Silica Zeolites 16

1.4.2 Hybrid Organic–Inorganic: Oxycarbosilanes 19

1.5 Conclusion 22

2 Ultra-Low-k by CVD: Deposition and Curing 35
Vincent Jousseaume, Aziz Zenasni, Olivier Gourhant, Laurent Favennec and Mikhail R. Baklanov

2.1 Introduction 35

2.2 Porogen Approach by PECVD 37

2.2.1 Precursors and Deposition Conditions 37

2.2.2 Mystery Still Unsolved: From Porogens to Pores 41

2.3 UV Curing 42

2.3.1 General Overview of Curing 42

2.3.2 UV Curing Mechanisms 43

2.4 Impact of Curing on Structure and Physical Properties: Benefits of UV Curing 49

2.4.1 Porosity 49

2.4.2 Chemical Structure and Mechanical Properties 50

2.4.3 Electrical Properties 56

2.5 Limit/Issues with the Porogen Approach 57

2.5.1 Porosity Creation Limit 58

2.5.2 Porogen Residues 59

2.6 Future of CVD Low-k 62

2.6.1 New Matrix Precursor 62

2.6.2 Other Deposition Strategies 64

2.6.3 New Deposition Techniques 66

2.7 Material Engineering: Adaptation to Integration Schemes 68

2.8 Conclusion 70

3 Plasma Processing of Low-k Dielectrics 79
Hualing Shi, Denis Shamiryan, Jean-Francois de Marneffe, Huai Huang, Paul S. Ho and Mikhail R. Baklanov

3.1 Introduction 79

3.2 Materials and Equipment 80

3.3 Process Results Characterization 82

3.4 Interaction of Low-k Dielectrics with Plasma 85

3.4.1 Low-k Etch Chemistries 85

3.4.2 Patterning Strategies and Masking Materials 87

3.4.3 Etch Mechanisms 88

3.5 Mechanisms of Plasma Damage 92

3.5.1 Gap Structure Studies 93

3.5.2 Effect of Radical Density 95

3.5.3 Effect of Ion Energy 96

3.5.4 Effect of Photon Energy and Intensity 99

3.5.5 Plasma Damage by Oxidative Radicals 103

3.5.6 Hydrogen-Based Plasma 105

3.5.7 Minimization of Plasma Damage 108

3.6 Dielectric Recovery 112

3.6.1 CH4 Beam Treatment 112

3.6.2 Dielectric Recovery by Silylation 113

3.6.3 UV Radiation 119

3.7 Conclusions 121

4 Wet Clean Applications in Porous Low-k Patterning Processes 129
Quoc Toan Le, Guy Vereecke, Herbert Struyf, Els Kesters and Mikhail R. Baklanov

4.1 Introduction 129

4.2 Silica and Porous Hybrid Dielectric Materials 130

4.3 Impact of Plasma and Subsequent Wet Clean Processes on the Stability of Porous Low-k Dielectrics 134

4.3.1 Stability in Pure Chemical Solutions 134

4.3.2 Stability in Commercial Chemistries 135

4.3.3 Hydrophobicity of Hybrid Low-k Materials 138

4.4 Removal of Post-Etch Residues and Copper Surface Cleaning 141

4.5 Plasma Modification and Removal of Post-Etch 193 nm Photoresist 146

4.5.1 Modification of 193 nm Photoresist by Plasma Etch 146

4.5.2 Wet Removal of 193 nm Photoresist 153

Section II Conductive Layers and Barriers 173

5 Copper Electroplating for On-Chip Metallization 175
Valery M. Dubin

5.1 Introduction 175

5.2 Copper Electroplating Techniques 176

5.3 Copper Electroplating Superfill 177

5.3.1 The Role of Accelerator 177

5.3.2 The Role of Suppressor 178

5.3.3 The Role of Leveler 180

5.4 Alternative Cu Plating Methods 182

5.4.1 Electroless Plating 182

5.4.2 Direct Plating 182

5.5 Electroplated Cu Properties 184

5.5.1 Resistivity 184

5.5.2 Impurities 184

5.5.3 Electromigration 185

5.6 Conclusions 186

6 Diffusion Barriers 193
Michael Hecker and René Hübner

6.1 Introduction 193

6.1.1 Cu Metallization, Barrier Requirements and Materials 193

6.1.2 Barrier Deposition Techniques 195

6.1.3 Characterization of Barrier Performance 196

6.2 Metal-Based Barriers as Liners for Cu Seed Deposition 198

6.2.1 Ta-Based Barriers 198

6.2.2 W-Based Barriers 209

6.2.3 Ti-Based Barriers 210

6.2.4 Further Systems 211

6.3 Advanced Barrier Approaches 212

6.3.1 Barriers for Direct Cu Plating 212

6.3.2 Metal Capping Layers 214

6.3.3 Self-Forming Diffusion Barriers 216

6.3.4 Self-Assembled Molecular Nanolayers and Polymer-Based Barriers 218

6.4 Conclusions 221

Section III Integration and Reliability 235

7 Integration and Electrical Properties 237
Sridhar Balakrishnan, Ruth Brain and Larry Zhao

7.1 Introduction 237

7.2 On-Die Interconnects in the Submicrometer Era 237

7.3 On-Die Interconnects at Sub-100 nm Nodes 240

7.4 Integration of Low-k Dielectrics in Sub-65 nm Nodes 241

7.4.1 Degradation of Dielectric Constant during Integration 243

7.4.2 Integration Issues in ELK Dielectrics Due to Degraded Mechanical Properties 246

7.5 Patterning Integration at Sub-65 nm Nodes 248

7.5.1 Patterning Challenges 249

7.6 Integration of Conductors in Sub-65 nm Nodes 252

7.6.1 Narrow Line Copper Resistivity 253

7.6.2 Integrating Novel Barrier/Liner Materials and Deposition Techniques for Cu Interconnects 254

7.6.3 Self-Forming Barriers and Their Integration 256

7.6.4 Integration to Enable Reliable Copper Interconnects 257

7.7 Novel Air-Gap Interconnects 258

7.7.1 Unlanded Via Integration with Air-Gap Interconnects 258

7.7.2 Air-Gap Formation Using Nonconformal Dielectric Deposition 259

7.7.3 Air-Gap Formation Using a Sacrificial Material 260

8 Chemical Mechanical Planarization for Cu–Low-k Integration 267
Gautam Banerjee

8.1 Introduction 267

8.2 Back to Basics 268

8.3 Mechanism of the CMP Process 268

8.4 CMP Consumables 271

8.4.1 Slurry 271

8.4.2 Pad 273

8.4.3 Pad Conditioner 274

8.5 CMP Interactions 276

8.6 Post-CMP Cleaning 281

8.6.1 Other Defects 286

8.6.2 Surface Finish 286

8.6.3 E-Test 287

8.7 Future Direction 287

References 288

9 Scaling and Microstructure Effects on Electromigration Reliability for Cu Interconnects 291
Chao-Kun Hu, René Hübner, Lijuan Zhang, Meike Hauschildt and Paul S. Ho

9.1 Introduction 291

9.2 Electromigration Fundamentals 293

9.2.1 EM Mass Flow 293

9.2.2 EM Lifetime and Scaling Rule 294

9.2.3 Statistical Test Method 296

9.2.4 Effect of Current Density on EM Lifetime 298

9.3 Cu Microstructure 300

9.3.1 X-ray Diffraction (XRD) 300

9.3.2 Electron Backscatter Diffraction in the Scanning Electron Microscope 302

9.3.3 Orientation Imaging Microscopy in the Transmission Electron Microscope 304

9.4 Lifetime Enhancement 306

9.4.1 Effect of a Ta Liner 306

9.4.2 Upper-Level Dummy Vias 308

9.4.3 Plasma Pre-clean and SiH4 Soak 310

9.4.4 CVD and ECD Cu and the Effect of Nonmetallic Impurities 311

9.4.5 Cu Alloys 314

9.4.6 CoWP Cap Near-Bamboo and Polycrystalline Cu Lines 319

9.5 Effect of Grain Size on EM Lifetime and Statistics 321

9.6 Massive-Scale Statistical Study of EM 326

9.7 Summary 329

10 Mechanical Reliability of Low-k Dielectrics 339
Kris Vanstreels, Han Li and Joost J. Vlassak

10.1 Introduction 339

10.2 Mechanical Properties of Porous Low-k Materials 340

10.2.1 Techniques to Measure Mechanical Properties of Thin Films 340

10.2.2 Effect of Porosity on the Stiffness of Organosilicate Glass Films 342

10.2.3 Hybrid Dielectrics Containing Organic/Inorganic Bridging Units 344

10.2.4 Effect of UV Wavelength and Porogen Content on the Hardening Process of PECVD Low-k Dielectrics 349

10.3 Fracture Properties of Porous Low-k Materials 352

10.3.1 Adhesion Measurement Methods 352

10.3.2 Fracture Toughness Measurement Techniques 354

10.3.3 Effect of Porosity and Network Structure on the Fracture Toughness of Organosilicate Glass Films 355

10.3.4 Effects of UV Cure on Fracture Properties of Carbon-Doped Oxides 357

10.3.5 Water Diffusion and Fracture Properties of Organosilicate Glass Films 359

10.4 Conclusion 361

11 Electrical Breakdown in Advanced Interconnect Dielectrics 369
Ennis T. Ogawa and Oliver Aubel

11.1 Introduction 369

11.1.1 Dual-Damascene Integration of Low-k Dielectrics 370

11.1.2 Low-k Types and Integrating Low-k Dielectrics 373

11.2 Reliability Testing 378

11.2.1 Measurement of Dielectric Degradation 378

11.2.2 Reliability Analysis 390

11.3 Lifetime Extrapolation and Models 397

11.4 Future Trends and Concerns 403

Section IV New Approaches 435

12 3D Interconnect Technology 437
John U. Knickerbocker, Lay Wai Kong, Sven Niese, Alain Diebold and Ehrenfried Zschech

12.1 Introduction 437

12.2 Dimensional Interconnected Circuits (3DICs) for System Applications 438
John U. Knickerbocker

12.2.1 Introduction 438

12.2.2 System Needs 441

12.2.3 3D Interconnect Design and Architecture 444

12.2.4 3D Fabrication and Interconnect Technology 446

12.2.5 Trade-offs in Application Design and Product Applications 464

12.2.6 Summary 466

12.3 Advanced Microscopy Techniques for 3D Interconnect Characterization 467
Lay Wai Kong, Sven Niese, Alain Diebold and Ehrenfried Zschech

12.3.1 Scanning Acoustic Microscopy 467

12.3.2 IR Microscopy 473

12.3.3 Transmission X-ray Microscopy and Tomography 474

12.3.4 Microstructure Analysis 480

12.4 Summary 486

13 Carbon Nanotubes for Interconnects 491
Mizuhisa Nihei, Motonobu Sato, Akio Kawabata, Shintaro Sato and Yuji Awano

13.1 Introduction 491

13.2 Advantage of CNT Vias 492

13.3 Fabrication Processes of CNT Vias 493

13.4 Electrical Properties of CNT Vias 496

13.5 Current Reliability of CNT Vias 498

13.6 Conclusion 501

14 Optical Interconnects 503
Wim Bogaerts

14.1 Introduction 503

14.2 Optical Links 505

14.2.1 Waveguides 507

14.2.2 Waveguide Filters and (De)multiplexers 510

14.2.3 Transmitter: Light Source 513

14.2.4 Transmitter: Modulators 514

14.2.5 Receiver: Photodetector 517

14.2.6 Power Consumption and Heat Dissipation 517

14.2.7 Different Materials 518

14.2.8 Conclusion 519

14.3 The Case for Silicon Photonics 519

14.3.1 Waveguides and WDM Components 519

14.3.2 Modulators, Tuners and Switches 523

14.3.3 Photodetectors 526

14.3.4 Light Sources 526

14.3.5 Conclusion 527

14.4 Optical Networks on a Chip 528

14.4.1 WDM Point-to-Point Links 529

14.4.2 Bus Architecture 529

14.4.3 (Reconfigurable) Networks 530

14.5 Integration Strategies 532

14.5.1 Front-End-of-Line Integration 533

14.5.2 Backside Integration 535

14.5.3 Back-End-of-Line Integration 535

14.5.4 3D Integration 536

14.5.5 Flip-Chip Integration 537

14.5.6 Conclusion 537

14.6 Conclusion 538

15 Wireless Interchip Interconnects 543
Takamaro Kikkawa

15.1 Introduction 543

15.2 Wireless Interconnect Technologies 547

15.2.1 Figure of Merit for Wireless Interconnects 547

15.2.2 Capacitively Coupled Wireless Interconnects 549

15.2.3 Inductively Coupled Wireless Interconnects 550

15.2.4 Antennas and Propagation 553

15.3 Conclusion 561

References 561

Index

The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.

The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.