- ISBN: 9780470402559 | 0470402555
- Cover: Hardcover
- Copyright: 12/21/2010
The proposed is an updated edition of a book that presents a classic approach to engineering elasticity. Lead author Art Boresi is considered one of the best authors in engineering mechanics alive today and has a number of well respected books to his credit. The classic approach taken will be enhanced in this revision based on both the authors plans and their acceptance of reviewer comments asking for more coverage of "modern" subjects and applications such as nano- and biomechanical elsaticity. Co-author Ken Chong at the NSF has proposed adding a third author, Wing K. Liu, from Northwestern University to help in this effort. They will also work to add more engineering applications and examples to supplement their more theoretical coverage. As with the second edition as solutions manual will be available on the instructor's companion site.
Arthur P. Boresi, PhD, Fellow of AAM, ASME, ASCE, is Professor Emeritus in the MechanicalScience and Engineering Department at the University of Illinois at Urbana–Champaign, where he has taught for more than twenty years, and the Department of Civil and Architectural Engineering at the University of Wyoming in Laramie. He has published over 100 refereed papers and is the senior author of a number of books, including Approximate Solution Methods in Engineering Mechanics and Advanced Mechanics of Materials (Wiley).
Ken P. Chong, PhD, PE, Fellow of AAM, ASME, SEM, DistMASCE, is a Professor at The George Washington University and an associate at NIST. He has been an interim division director,engineering advisor, and director of the mechanics and materials for a total of twenty-one years at the U.S. National Science Foundation. He has published over 200 refereed papers, and is the author or coauthor of twelve books including Intelligent Structures, Modeling and Simulation-Based Life Cycle Engineering, and Materials for the New Millennium. He has taught at the Universities of Wyoming, Hong Kong, and Houston, in addition to being a visiting professor at MIT and University of Washington.
James D. Lee, PhD, PE, Fellow of ASME, is a Professor at The George Washington University teaching in the areas of continuum mechanics, nanomechanics, fracture mechanics, and finite element methods. He has been a researcher at General Tire and Rubber Company, NIST, and NASA, and has published over 100 journal papers and many conference papers. He also coauthored the book Meshless Methods in Solid Mechanics. He received the School of Engineering and Applied Science at GWU Distinguished Researcher Award.
Preface.
CHAPTER 1 INTRODUCTORY CONCEPTS AND MATHEMATICS.
Part I Introduction.
1-1 Trends and Scopes.
1-2 Theory of Elasticity.
1-3 Numerical Stress Analysis.
1-4 General Solution of the Elasticity.
1-5 Experimental Stress Analysis.
1-6 Boundary Value Problems of Elasticity.
Part II Preliminary Concepts.
1-7 Brief Summary of Vector Algebra.
1-8 Scalar Point Functions.
1-9 Vector Fields.
1-10 Differentiation of Vectors.
1-11 Differentiation of a Scalar Field.
1-12 Differentiation of a Vector Field.
1-13 Curl of a Vector Field.
1-14 Eulerian Continuity Equation for Fluids.
1-15 Divergence Theorem.
1-16 Divergence Theorem in Two Dimensions.
1-17 Line and Surface Integrals (Application of Scalar Product).
1-18 Stokes's Theorem.
1-19 Exact Differential.
1-20 Orthogonal Curvilinear Coordiantes in Three-Dimensional Space.
1-21 Expression for Differential Length in Orthogonal Curvilinear Coordinates.
1-22 Gradient and Laplacian in Orthogonal Curvilinear Coordinates.
Part III Elements of Tensor Algebra.
1-23 Index Notation: Summation Convention.
1-24 Transformation of Tensors under Rotation of Rectangular Cartesian Coordinate System.
1-25 Symmetric and Antisymmetric Parts of a Tensor.
1-26 Symbols dij and ijk (the Kronecker Delta and the Alternating Tensor).
1-27 Homogeneous Quadratic Forms.
1-28 Elementary Matrix Algebra.
1-29 Some Topics in the Calculus of Variations.
CHAPTER 2 THEORY OF DEFORMATION.
2-1 Deformable, Continuous Media.
2-2 Rigid-Body Displacements.
2-3 Deformation of a Continuous Region. Material Variables. Spatial Variables.
2-4 Restrictions on Continuous Deformation of a Deformable Medium.
2-5 Gradient of the Displacement Vector. Tensor Quantity.
2-6 Extension of an Infinitesimal Line Element.
2-7 Physical Significance of ii. Strain Definitions.
2-8 Final Direction of Line Element. Definition of Shearing Strain. Physical Significance of ij(i ? j).
2-9 Tensor Character of aß. Strain Tensor.
2-10 Reciprocal Ellipsoid. Principal Strains. Strain Invariants.
2-11 Determination of Principal Strains. Principal Axes.
2-12 Determination of Strain Invariants. Volumetric Strain.
2-13 Rotation of a Volume Element. Relation to Displacement Gradients.
2-14 Homogeneous Deformation.
2-15 Theory of Small Strains and Small Angles of Rotation.
2-16 Compatibility Conditions of the Classical Theory of Small Displacements.
2-17 Additional Conditions Imposed by Continuity.
2-18 Kinematics of Deformable Media.
Appendix 2A Strain–Displacement Relations in Orthogonal Curvilinear Coordinates.
Appendix 2B Derivation of Strain–Displacement Relations for Special Coordinates by Cartesian Methods.
Appendix 2C Strain–Displacement Relations in General Coordinates.
CHAPTER 3 THEORY OF STRESS.
3-1 Definition of Stress.
3-2 Stress Notation.
3-3 Summation of Moments. Stress at a Point. Stress on an Oblique Plane.
3-4 Tensor Character of Stress. Transformation of Stress Components under Rotation of Coordinate Axes.
3-5 Principal Stresses. Stress Invariants. Extreme Values.
3-6 Mean and Deviator Stress Tensors. Octahedral Stress.
3-7 Approximations of Plane Stress. Mohr's Circles in Two and Three Dimensions.
3-8 Differential Equations of Motion of a Deformable Body Relative to Spatial Coordinates.
Appendix 3A Differential Equations of Equilibrium in Curvilinear Spatial Coordinates.
Appendix 3B Equations of Equilibrium Including Couple Stress and Body Couple.
Appendix 3C Reduction of Differential Equations of Motion for Small-Displacement Theory.
CHAPTER 4 THREE-DIMENSIONAL EQUATIONS OF ELASTICITY.
4-1 Elastic and Nonelastic Response of a Solid.
4-2 Intrinsic Energy Density Function (Adiabatic Process).
4-3 Relation of Stress Components to Strain Energy Density Function.
4-4 Generalized Hooke's Law.
4-5 Isotropic Media. Homogeneous Media.
4-6 Strain Energy Density for Elastic Isotropic Medium.
4-7 Special States of Stress.
4-8 Equations of Thermoelasticity.
4-9 Differential Equation of Heat Conduction.
4-10 Elementary Approach to Thermal-Stress Problem in One and Two Variables.
4-11 Stress–Strain–Temperature Relations.
4-12 Thermoelastic Equations in Terms of Displacement.
4-13 Spherically Symmetrical Stress Distribution (The Sphere).
4-14 Thermoelastic Compatibility Equations in Terms of Components of Stress and Temperature. Beltrami–Michell Relations.
4-15 Boundary Conditions.
4-16 Uniqueness Theorem for Equilibrium Problem of Elasticity.
4-17 Equations of Elasticity in Terms of Displacement Components.
4-18 Elementary Three-Dimensional Problems of Elasticity. Semi-Inverse Method.
4-19 Torsion of Shaft with Constant Circular Cross Section.
4-20 Energy Principles in Elasticity.
4-21 Principle of Virtual Work.
4-22 Principle of Virtual Stress (Castigliano's Theorem).
4-23 Mixed Virtual Stress–Virtual Strain Principles (Reissner’s Theorem).
Appendix 4A Application of the Principle of Virtual Work to a Deformable Medium (Navier–Stokes Equations).
Appendix 4B Nonlinear Constitutive Relationships.
Appendix 4C Micromorphic Theory.
Appendix 4D Atomistic Field Theory.
CHAPTER 5 PLANE THEORY OF ELASTICITY IN RECTANGULAR CARTESIAN COORDINATES.
5-1 Plane Strain.
5-2 Generalized Plane Stress.
5-3 Compatibility Equation in Terms of Stress Components.
5-4 Airy Stress Function.
5-5 Airy Stress Function in Terms of Harmonic Functions.
5-6 Displacement Components for Plane Elasticity.
5-7 Polynomial Solutions of Two-Dimensional Problems in Rectangular Cartesian Coordinates.
5-8 Plane Elasticity in Terms of Displacement Components.
5-9 Plane Elasticity Relative to Oblique Coordinate Axes.
Appendix 5A Plane Elasticity with Couple Stresses.
Appendix 5B Plane Theory of Elasticity in Terms of Complex Variables.
CHAPTER 6 PLANE ELASTICITY IN POLAR COORDINATES.
6-1 Equilibrium Equations in Polar Coordinates.
6-2 Stress Components in Terms of Airy Stress Function F = F(r,0 ).
6-3 Strain–Displacement Relations in Polar Coordinates.
6-4 Stress–Strain–Temperature Relations.
6-5 Compatibility Equation for Plane Elasticity in Terms of Polar Coordinates.
6-6 Axially Symmetric Problems.
6-7 Plane Elasticity Equations in Terms of Displacement Components.
6-8 Plane Theory of Thermoelasticity.
6-9 Disk of Variable Thickness and Nonhomogeneous Anisotropic Material.
6-10 Stress Concentration Problem of Circular Hole in Plate.
6-11 Examples.
Appendix 6A Stress–Couple Theory of Stress Concentration Resulting from Circular Hole in Plate.
Appendix 6B Stress Distribution of a Diametrically Compressed Plane Disk.
CHAPTER 7 PRISMATIC BAR SUBJECTED TO END LOAD.
7-1 General Problem of Three-Dimensional Elastic Bars Subjected to Transverse End Loads.
7-2 Torsion of Prismatic Bars. Saint-Venant's Solution. Warping Function.
7-3 Prandtl Torsion Function.
7-4 A Method of Solution of the Torsion Problem: Elliptic Cross Section.
7-5 Remarks on Solutions of the Laplace Equation, v2F = 0.
7-6 Torsion of Bars with Tubular Cavities.
7-7 Transfer of Axis of Twist.
7-8 Shearing–Stress Component in Any Direction.
7-9 Solution of Torsion Problem by the Prandtl Membrane Analogy.
7-10 Solution by Method of Series. Rectangular Section.
7-11 Bending of a Bar Subjected to Transverse End Force.
7-12 Displacement of a Cantilever Beam Subjected to Transverse End Force.
7-13 Center of Shear.
7-14 Bending of a Bar with Elliptic Cross Section.
7-15 Bending of a Bar with Rectangular Cross Section.
Appendix 7A Analysis of Tapered Beams.
CHAPTER 8 GENERAL SOLUTIONS OF ELASTICITY.
8-1 Introduction.
8-2 Equilibrium Equations.
8-3 The Helmholtz Transformation.
8-4 The Galerkin (Papkovich) Vector.
8-5 Stress in Terms of the Galerkin Vector F.
8-6 The Galerkin Vector: A Solution of the Equilibrium Equations of Elasticity.
8-7 The Galerkin Vector kZ and Love's Strain Function for Solids of Revolution.
8-8 Kelvin's Problem: Single Force Applied in the Interior of an Infinitely Extended Solid.
8-9 The Twinned Gradient and Its Application to Determine the Effects of a Change of Poisson's Ratio.
8-10 Solutions of the Boussinesq and Cerruti Problems by the Twinned Gradient Method.
8-11 Additional Remarks on Three-Dimensional Stress Functions.
References.
Bibliography.
INDEX.
What is included with this book?
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.
Please wait while the item is added to your bag...
