Note: Supplemental materials are not guaranteed with Rental or Used book purchases.
- ISBN: 9781118291405 | 1118291409
- Cover: Hardcover
- Copyright: 4/3/2012
EPD Congress is annually offered as part of a series of conference proceedings that address the state of the industry and art associated with extraction and process metallurgy. The congress is held at the annual meeting of The Minerals, Metals and Materials Society. This book is divided into three sections: Materials Processing Fundamentals Recycling General Session Solar Cell Silicon
EPD Council 2012 | p. xiii |
EPD Honors and Awards 2012 | p. xv |
Materials Processing Fundamentals | |
Physical Metallurgy of Steel | |
Influence of the Hot Roiling Process on the Mechanical Behaviour of Dual Phase Steel | p. 9 |
Continuous Casting Simulation of 2304 Duplex Stainless Steel Via Horizontal Directional Solidification Technique | p. 17 |
Influence of Cooling Rates on Nitrogen Precipitation Behaviors and the Ferrite Fraction in Cast 2507 Super Duplex Stainless Steel | p. 25 |
Microstructure and Corrosion Behaviour of TiC Reinforced Duplex Stainless Steels Matrix Composites Synthesized by Laser Melt Injection | p. 33 |
Process Metallurgy of Metals | |
A Critical Review of the Modified Froude Number in Ladle Metallurgy | p. 43 |
Inclusion Characteristics in Stainless Steel Ingots | p. 51 |
FEM Study of Centerline Defect Closure in Large Open-Die Forgings | p. 63 |
Effect of Mould Taper and Wall Thickness on Steel Ingots Soundness by 3-D Solidification Simulation | p. 71 |
Hydrometallurgical Study of Purifying MG Silicon Feedstock for Solar Cells Production | p. 79 |
The Effect of Fe Addition on the Activity of Si in Liquid Cu-Si Alloys | p. 87 |
Thermodynamic Properties of the Silicon Binary Melts | p. 95 |
Application of Microwave, Magnet, Laser and Plasma Technology | |
Non-Contact Measurements in Liquid Metal Free-Surface Flow Using Time-of-Flight Lorentz Force Velocimetry | p. 105 |
Modeling of Pulsed-Laser Superalloy Powder Deposition Using Moving Distributed Heat Source | p. 113 |
Heat Transfer Characteristics of Magnetite under Microwave Irradiation | p. 121 |
Refinement Effect of Pulse Magneto-Oscillation on Solidification Structure of Medium Carbon Steel | p. 129 |
Solidification Structure Refinement of SUS430 Ferritic Stainless Steel by Electric Current Pulse | p. 135 |
Metallurgy of Non-Ferrous Metals | |
Annealing Effect and Tensile Interface Fracture Mechanism of Pure Silver Bonding Wires | p. 145 |
Horizontal Directional Solidification of Zn-Sn Alloys | p. 153 |
Dynamic Recovery during Low Temperature Deformation in an Al-0.1 Mg Alloy | p. 161 |
Challenges in Compound Forging of Steel-Aluminum Parts | p. 169 |
Poster Session | |
Effect of Process Parameters on Powdering Characteristics of Galvannealed Materials | p. 179 |
Hot Deformation Behavior of Nb Microalloyed Coiled Tubing Steel | p. 185 |
Study on Inclusions in 65Mn Thin Slabs Produced by a CSP Process | p. 193 |
A Way to Control Distortion of Metal Parts during Heat Treatment Process | p. 201 |
Investigation of the Relationship of the Melt Structures and Solidification Behaviors of Cu-Sb70 Alloy Explored by Electrical Resistivity Method | p. 209 |
Microstructure of Al2O3/YAG/ZrO2 Eutectic In Situ Composite Prepared by Laser Floating Zone Melting | p. 217 |
Net Shape Manufacturing of a Novel Cermet Using Self-Propagating High Temperature Synthesis | p. 225 |
Recycling General Session Electronics | |
Control of Gas Emission during Pyrolysis of Waste Printed Wiring Boards | p. 237 |
Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs) | p. 247 |
Effects of Inoculums Volume on Metals Extraction from Printed Circuit Boards of Computers by Bacterial Leaching | p. 255 |
Removal of Copper Cyanide Complexes from Solutions Formed in Silver/Gold-Cyanidation Recovery Process | p. 263 |
Dissolution of Mixed Zinc-Carbon and Alkaline Battery Powders in Sulphuric Acid Using Ascorbic/Oxalic Acid as a Reductant | p. 271 |
Selective Recovery of Precious Metals by Selective Adsorption on Garlic Peel Gel | p. 289 |
Separation of Si/SiC Wiresaw Cutting Powder Through Sedimentation by Adjusting the Solution pHs | p. 297 |
Metals | |
Advantages of Integrated and Long Term Aluminum Recycling Batch Planning in a Constrained Secondary Material Market | p. 307 |
Fabrication of Replicated Open-cell Aluminium Foams Using Recycled ADC12 Aluminium Alloy | p. 315 |
In-Process Separation of Mill Scale From Oil at Steel Hot Rolling Mills | p. 323 |
Recycling of Electric Arc Furnace Dust: Evaluation of the Iron Metal Incorporation in Hot Metal Bath | p. 331 |
Recycling of Electric Arc Furnace Dust in Iron Ore Sintering | p. 339 |
Extraction of Iron Oxide and Concentration of Titanium Compounds in Red Mud | p. 345 |
Heat Treatment of Black Dross for the Production of a Value Added Material-A Preliminary Study | p. 353 |
Addition of Electric Arc Furnace Dusts in Hot Metal | p. 361 |
Building Materials | |
Ecological Recovery Process for Textile Waste | p. 371 |
Technical Tools for Increasing the Eco-Efficiency of Textile Products | p. 375 |
An Evaluation Study: Recent Developments and Processing of Glass Scrap Recycling | p. 381 |
Recycling of Flat Glass Waste into Clayey Ceramic | p. 389 |
Recycling of Styrene-Divinylbenzene Copolymer through Sequential Mass-Suspension Polymerization Process | p. 395 |
Waste Utilization | |
Experimental Research on Acid Magenta Dye Decolor Dynamics | p. 403 |
Recovery of Magnesium from Waste Effluent in Nickel Laterite Hydrometallurgy Process | p. 409 |
Recycling of Reverted IN738LC with Reference to Mechanical Properties and Control of Chemical Composition | p. 417 |
A Kinetics Study on the Hydrometallurgical Recovery of Vanadium from LD Converter Slag in Alkaline Media | p. 425 |
Poster Session | |
AMD Treatment Using Rice Husk as Biosorbent | p. 437 |
Salvinia sp Applied to AMD Treatment: Equilibrium Time and Biomass Characterization | p. 443 |
Solar Cell Silicon | |
Silicon Production | |
An Investigation into the Electrochemical Production of Si by the FFC Cambridge Process | p. 455 |
Distribution of Boron and Phosphorus during Alloying and Slag Treatment of Metallurgical Grade Silicon | p. 463 |
The Kinetics of Boron Removal during Slag Refining in the Production of Solar-Grade Silicon | p. 471 |
Raman Spectroscopic Study of the Structural Modifications Associated with the Addition of Calcium Oxide and Boron Oxide to Silica | p. 481 |
Structure Silicon Deposits Obtained by Electrolysis SiO2 in the Chloride-Fluoride Melts | p. 493 |
Refining and Characterization | |
High Frequency Electromagnetic Purification of Silicon | p. 499 |
Mono-Like Ingot/Wafers Made of Solar-Grade Silicon for Solar Cells Application | p. 507 |
Thermodynamics of Phosphorous Distribution between Si and Fe-Si in Solvent Refining of Silicon | p. 513 |
Imaging Techniques for the Characterization of Multi-Crystalline Silicon Bricks and Wafers | p. 521 |
Thermodynamics on Boron Rejection during Metallurgical Grade Silicon Oxidation by Silicon Dioxide | p. 529 |
2D and 3D Numerical Modeling of Solidification Benchmark of Sn-3Pb (%wt.) Alloy under Natural Convection | p. 537 |
Author Index | p. 545 |
Subject Index | p. 549 |
Table of Contents provided by Ingram. All Rights Reserved. |
What is included with this book?
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.