- ISBN: 9780470681985 | 0470681985
- Cover: Hardcover
- Copyright: 12/26/2012
Despite the amount of money that has been spent on inkjet research, there is still a lot we don't know about the underlying science of inkjet technology. The development of inkjet digital fabrication involves a wide range of disciplines from chemistry, physics and engineering to electronics and software. This book provides a comprehensive overview on the use of inkjet printing for digital fabrication, with contributions from academic researchers and leading names in industry. Opening chapters cover the essential theory and principles involved in inkjet printing, and later chapters address current practice and problems. Key features: Fills a need for an up-to-date book covering recent research in inkjet developments Includes contributions from academic researchers and leading industry names, e.g. Philips, Seiko Epson Brings together in one volume the essential theory of inkjet technology, and practical information on industrial applications and problem-solving
Ian Hutchings is Professor of Manufacturing Engineering at the University of Cambridge. He is also Principal Investigator for the EPSRC and industry-funded project on Next Generation Inkjet Technology: A major UK collaborative initiative.
Dr Graham Martin is currently Director for the Inkjet Research Centre at Cambridge University, and prior to this he spent many years in the inkjet industry.
About the Editors xv
List of Contributors xvii
Preface xix
1. Introduction to Inkjet Printing for Manufacturing 1
Ian M. Hutchings and Graham Martin
1.1 Introduction 1
1.2 Materials and Their Deposition by Inkjet Printing 3
1.2.1 General Remarks 3
1.2.2 Deposition of Metals 3
1.2.3 Deposition of Ceramics 6
1.2.4 Deposition of Polymers 7
1.3 Applications to Manufacturing 8
1.3.1 Direct Deposition 9
1.3.2 Inkjet Mask Printing 12
1.3.3 Inkjet Etching 13
1.3.4 Inverse Inkjet Printing 14
1.3.5 Printing onto a Powder Bed 15
1.4 Potential and Limitations 15
References 17
2. Fundamentals of Inkjet Technology 21
Graham Martin and Ian M. Hutchings
2.1 Introduction 21
2.2 Surface Tension and Viscosity 23
2.3 Dimensionless Groups in Inkjet Printing 25
2.4 Methods of Drop Generation 27
2.4.1 Continuous Inkjet (CIJ) 27
2.4.1.1 Single-Jet CIJ 27
2.4.1.2 Multiple-Jet CIJ 28
2.4.2 Drop-on-Demand (DOD) 28
2.4.2.1 Thermal DOD 29
2.4.2.2 Piezoelectric DOD 30
2.4.2.3 Other DOD Methods 33
2.4.3 Electrospray 33
2.5 Resolution and Print Quality 34
2.6 Grey-Scale Printing 35
2.7 Reliability 36
2.8 Satellite Drops 38
2.9 Print-Head and Substrate Motion 39
2.10 Inkjet Complexity 42
References 42
3. Dynamics of Piezoelectric Print-Heads 45
J. Frits Dijksman and Anke Pierik
3.1 Introduction 45
3.2 Basic Designs of Piezo-Driven Print-Heads 47
3.3 Basic Dynamics of a Piezo-Driven Inkjet Print-Head (Single-Degree-of-Freedom Analysis) 49
3.4 Design Considerations for Droplet Emission from Piezo-Driven Print-Heads 60
3.4.1 Droplet Formation 60
3.4.1.1 Relation between Droplet Formation and Characteristic Frequency 61
3.4.1.2 Analysis of Droplet Formation (Positive Pulse) 62
3.4.1.3 Analysis of Droplet Formation (Negative Pulse) 65
3.4.2 Damping 66
3.4.3 Refilling 67
3.4.3.1 Capillary-Driven Refilling 67
3.4.3.2 Bernoulli Underpressure-Driven Refilling 68
3.4.3.3 Refilling Associated with Partial Filling of the
Nozzle after Release of the Droplet 69
3.4.4 Deceleration Due to Elongational Effects Prior to Pinching Off 70
3.4.5 Summary 71
3.5 Multi-Cavity Helmholtz Resonator Theory 71
3.6 Long Duct Theory 77
3.7 Concluding Remarks 83
References 84
4. Fluids for Inkjet Printing 87
Stephen G. Yeates, Desheng Xu, Marie-Beatrice Madec,Dolores Caras-Quintero, Khalid A. Alamry, Andromachi Malandraki and Veronica Sanchez-Romaguera
4.1 Introduction 87
4.2 Print-Head Considerations 88
4.2.1 Continuous Inkjet (CIJ) 88
4.2.2 Thermal Inkjet (TIJ) 88
4.2.3 Piezoelectric Drop-on-Demand (Piezo-DOD) 89
4.3 Physical Considerations in DOD Droplet Formation 89
4.4 Ink Design Considerations 95
4.5 Ink Classification 95
4.5.1 Aqueous Ink Technology 96
4.5.1.1 Inkjet Colorants 97
4.5.1.2 Colorant–Substrate Interactions 99
4.5.1.3 Polymeric Additives 100
4.5.2 Non-aqueous Ink Technologies 100
4.5.2.1 Oil-Based Pigment Inks 100
4.5.2.2 Phase Change Inks 101
4.5.2.3 100% Solids UV Cure 101
4.5.2.4 Solvent-Based Inks 103
4.6 Applications in Electronic Devices 105
4.6.1 Organic Conducting Polymers 105
4.6.2 Conjugated Organic Semiconductors 106
4.6.3 Inorganic Particles 107
References 108
5. When the Drop Hits the Substrate 113
Jonathan Stringer and Brian Derby
5.1 Introduction 113
5.2 Stable Droplet Deposition 114
5.2.1 Deposition Maps 114
5.2.2 Impact of Millimetre-Size Droplets 116
5.2.3 Impact of Inkjet-Sized Droplets 119
5.3 Unstable Droplet Deposition 120
5.4 Capillarity-Driven Spreading 122
5.4.1 Droplet–Substrate Equilibrium 122
5.4.2 Capillarity-Driven Contact Line Motion 124
5.4.3 Contact Angle Hysteresis 125
5.5 Coalescence 126
5.5.1 Stages of Coalescence 126
5.5.1.1 Bridge Formation and Broadening 126
5.5.1.2 Droplet Relaxation 127
5.5.2 Coalescence and Pattern Formation 128
5.5.3 Stable Bead Formation 128
5.5.4 Unstable Bead Formation 130
5.6 Phase Change 131
5.6.1 Solidification 132
5.6.2 Evaporation 132
5.7 Summary 134
References 135
6. Manufacturing of Micro-Electro-Mechanical Systems (MEMS) 141
David B. Wallace
6.1 Introduction 141
6.2 Limitations and Opportunities in MEMS Fabrication 142
6.3 Benefits of Inkjet in MEMS Fabrication 143
6.4 Chemical Sensors 144
6.5 Optical MEMS Devices 147
6.6 Bio-MEMS Devices 151
6.7 Assembly and Packaging 152
6.8 Conclusions 156
Acknowledgements 156
References 156
7. Conductive Tracks and Passive Electronics 159
Jake Reder
7.1 Introduction 159
7.2 Vision 159
7.3 Drivers 160
7.3.1 Efficient Use of Raw Materials 160
7.3.2 Short-Run and Single-Example Production 161
7.3.3 Capital Equipment 162
7.4 Incumbent Technologies 162
7.5 Conductive Tracks and Contacts 162
7.5.1 What Is Conductive? 162
7.5.2 Conductive Tracks in the Third Dimension 163
7.5.3 Contacts 163
7.6 Raw Materials: Ink 164
7.6.1 Particles 164
7.6.1.1 Composition 165
7.6.1.2 Particle Shape 166
7.6.1.3 Particle Size 166
7.6.2 Dispersants 168
7.6.3 Carriers (Liquid Media) 170
7.6.4 Other Additives 170
7.6.4.1 Humectants 170
7.6.4.2 Surfactants 171
7.6.4.3 Adhesion Promoters 171
7.6.4.4 Biocides 172
7.7 Raw Materials: Conductive Polymers 172
7.8 Raw Materials: Substrates 172
7.9 Printing Processes 174
7.10 Postprocessing 174
7.10.1 Sintering 174
7.10.2 Protective Layers 175
7.11 Resistors 175
7.12 Capacitors 176
7.13 Other Passive Electronic Devices 176
7.13.1 Fuses, Circuit Breakers, and Switches 176
7.13.2 Inductors and Transformers 177
7.13.3 Batteries 177
7.13.4 Passive Filters 177
7.13.5 Electrostatic Discharge (ESD) 177
7.13.6 Thermal Management 178
7.14 Outlook 178
References 178
8. Printed Circuit Board Fabrication 183
Neil Chilton
8.1 Introduction 183
8.2 What Is a PCB? 183
8.3 How Is a PCB Manufactured Conventionally? 185
8.4 Imaging 185
8.4.1 Imaging Using Phototools 187
8.4.2 Laser Direct Imaging 188
8.5 PCB Design Formats 188
8.6 Inkjet Applications in PCB Manufacturing 189
8.6.1 Introduction 189
8.6.2 Legend Printing 190
8.6.3 Soldermask 194
8.6.4 Etch Resist 196
8.6.4.1 Introduction 196
8.6.4.2 Print Resolution and Acuity 197
8.6.4.3 Commercial Implementation of Inkjet Etch Resist 202
8.7 Future Possibilities 202
References 205
9. Active Electronics 207
Madhusudan Singh, Hanna M. Haverinen, Yuka Yoshioka and Ghassan E. Jabbour
9.1 Introduction 207
9.2 Applications of Inkjet Printing to Active Devices 211
9.2.1 OLEDs 211
9.2.1.1 Lighting 211
9.2.1.2 Displays 212
9.2.2 Other Displays 213
9.2.3 Energy Storage Using Batteries and Supercapacitors 214
9.2.4 Photovoltaics 215
9.2.5 Sensors 217
9.2.6 Transistors, Logic, and Memory 219
9.2.7 Contacts and Conductors 221
9.2.8 In Situ Synthesis and Patterning 223
9.2.9 Biological Applications 223
9.3 Future Outlook 224
References 225
10. Flat Panel Organic Light-Emitting Diode (OLED) Displays: A Case Study 237
Julian Carter, Mark Crankshaw and Sungjune Jung
10.1 Introduction 237
10.2 Development of Inkjet Printing for OLED Displays 238
10.3 Inkjet Requirements for OLED Applications 241
10.3.1 Introduction 241
10.3.2 Display Geometry 241
10.3.3 Containment and Solid Content 241
10.4 Ink Formulation and Process Control 243
10.5 Print Defects and Control 246
10.6 Conclusions and Outlook 249
Acknowledgements 250
References 250
11. Radiofrequency Identification (RFID) Manufacturing: A Case Study 255
Vivek Subramanian
11.1 Introduction 255
11.2 Conventional RFID Technology 256
11.2.1 Introduction 256
11.2.2 RFID Standards and Classifications 256
11.2.2.1 135 kHz RFID 256
11.2.2.2 13.56 MHz RFID 257
11.2.2.3 900 MHz RFID and 2.4 GHz RFID 257
11.2.2.4 Summary of RFID Categories 258
11.2.3 RFID Using Silicon 258
11.3 Applications of Printing to RFID 260
11.4 Printed Antenna Structures for RFID 260
11.4.1 The Case for Printed Antennae 260
11.4.2 Printed RFID Antenna Technology 261
11.4.3 Summary of Status and Outlook for Printed Antennae 262
11.5 Printed RFID Tags 263
11.5.1 Introduction 263
11.5.2 Topology and Architecture of Printed RFID 264
11.5.2.1 Antenna Stage 264
11.5.2.2 Rectifier, Power Supply, and Clamp 265
11.5.2.3 Digital Section and Modulation Stage 265
11.5.3 Devices for Printed RFID 267
11.5.3.1 Electronic Materials for Printed RFID 268
11.5.3.2 Inkjet-Printed Transistors for RFID 269
11.5.3.3 Circuit Implementation Issues for Printed RFID 270
11.5.3.4 Printed RFID Demonstrators 272
11.6 Conclusions 273
References 273
12. Biopolymers and Cells 275
Paul Calvert and Thomas Boland
12.1 Introduction 275
12.2 Printers for Biopolymers and Cells 277
12.2.1 Printer Types 277
12.2.2 Piezoelectric Print-Heads 277
12.2.3 Thermal Inkjet Print-Heads 279
12.2.4 Comparison of Thermal and Piezoelectric Inkjet for Biopolymer Printing 279
12.2.5 Other Droplet Printers 280
12.2.6 Rapid Prototyping and Inkjet Printing 281
12.3 Ink Formulation 282
12.3.1 Introduction 282
12.3.2 Printed Resolution 283
12.3.3 Major Parameters: Viscosity and Surface Tension 283
12.3.4 Drying 285
12.3.5 Corrosion 285
12.3.6 Nanoparticle Inks 285
12.3.7 Biopolymer Inks 285
12.3.7.1 Coiled Biopolymers 286
12.3.7.2 Globular Proteins 287
12.4 Printing Cells 289
12.4.1 Cell-Directing Patterns 289
12.4.2 Cell-Containing Inks 290
12.4.3 Effects of Piezoelectric and Thermal Print-Heads on Cells 290
12.4.4 Cell Attachment and Growth 291
12.4.5 Biocompatibility in the Body 292
12.5 Reactive Inks 292
12.6 Substrates for Printing 296
12.7 Applications 297
12.7.1 Tissue Engineering 297
12.7.2 Bioreactors 298
12.7.3 Printed Tissues 298
12.8 Conclusions 299
References 299
13. Tissue Engineering: A Case Study 307
Makoto Nakamura
13.1 Introduction 307
13.1.1 Tissue Engineering and Regenerative Medicine 307
13.1.2 The Third Dimension in Tissue Engineering and Regenerative Medicine 308
13.1.3 The Current Approach for Manufacturing 3D Tissues 309
13.1.4 A New Approach of Direct 3D Fabrication with Live Cell Printing 309
13.2 A Feasibility Study of Live Cell Printing by Inkjet 310
13.3 3D Biofabrication by Gelation of Inkjet Droplets 313
13.4 2D and 3D Biofabrication by a 3D Bioprinter 314
13.4.1 Micro-Gel Beads 314
13.4.2 Micro-Gel Fiber and Cell Printing 315
13.4.3 2D and 3D Fabrication of Gel Sheets and Gel Mesh 316
13.4.4 Fabrication of 3D Gel Tubes 316
13.4.5 Multicolor 3D Biofabrication 316
13.4.6 Viscosity in Inkjet 3D Biofabrication 318
13.5 Use of Inkjet Technology for 3D Tissue Manufacturing 319
13.5.1 Resolution and DOD Color Printing 319
13.5.2 Direct Printing of Live Cells 319
13.5.3 High-Speed Printing 319
13.5.4 3D Fabrication Using Hydrogels 320
13.5.5 Linkage to Digital Data Sources 321
13.5.6 Applicability to Various Materials including Humoral Factors and Nanomaterials 321
13.5.7 Use of Pluripotent Stem Cells in Bioprinting 322
13.6 Summary and Future Prospects 322
Acknowledgements 323
References 323
14. Three-Dimensional Digital Fabrication 325
Bill O’Neill
14.1 Introduction 325
14.2 Background to Digital Fabrication 326
14.3 Digital Fabrication and Jetted Material Delivery 329
14.4 Liquid-Based Fabrication Techniques 330
14.4.1 PolyJet™: Objet Geometries 330
14.4.1.1 Support Materials 331
14.4.1.2 System Characteristics 331
14.4.2 ProJet™: 3D Systems 333
14.4.3 Solidscape 3D Printers 333
14.5 Powder-Based Fabrication Techniques 335
14.5.1 ZPrinter™: Z Corporation 335
14.5.2 Other Powder-Based 3D Printers 338
14.6 Research Challenges 338
14.7 Future Trends 340
References 341
15. Current Inkjet Technology and Future Directions 343
Mike Willis
15.1 The Inkjet Print-Head as a Delivery Device 343
15.2 Limitations of Inkjet Technology 344
15.2.1 Jetting Fluid Constraints 344
15.2.2 Control of Drop Volume 345
15.2.3 Variations in Drop Volume 345
15.2.4 Jet Directionality and Drop Placement Errors 345
15.2.5 Aerodynamic Effects 347
15.2.6 Impact and Surface Wetting Effects 347
15.3 Today’s Dominant Technologies and Limitations 348
15.3.1 Thermal DOD Inkjet 348
15.3.2 Piezoelectric DOD Inkjet 350
15.4 Other Current Technologies 351
15.4.1 Continuous Inkjet 351
15.4.2 Electrostatic DOD 351
15.4.3 Acoustic Drop Ejection 351
15.5 Emerging Technologies 352
15.5.1 Stream 353
15.5.2 MEMS 354
15.5.3 Flextensional 355
15.5.4 Tonejet 355
15.6 Future Trends for Print-Head Manufacturing 356
15.7 Future Requirements and Directions 358
15.7.1 Customisation of Print-Heads for Digital Fabrication 358
15.7.2 Reduce Sensitivity of Jetting to Ink Characteristics 358
15.7.3 Higher Viscosities 358
15.7.4 Higher Stability and Reliability 359
15.7.5 Drop Volume Requirements 359
15.7.6 Lower Costs 360
15.8 Summary of Status of Inkjet Technology for Digital Fabrication 361
References 361
Index 363
What is included with this book?
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.
Please wait while the item is added to your bag...
