- ISBN: 9781853122651 | 1853122653
- Cover: Hardcover
- Copyright: 4/1/1999
Transient conduction in a rotating cylindrical shell exposed to an incident time varying heat flux | p. 3 |
Application of the adaptive multi-level method to industrial heat conduction problems | p. 11 |
Computer aided determination of closed form solutions for linear transient heat conduction problems in inhomogeneous bodies | p. 19 |
A finite element approach to simulate general thermal conduction problems | p. 27 |
Generalized heat conduction transfer functions in two dimensional linear systems of assigned geometry | p. 35 |
Laminar mixed convection flow in the entrance region of uniformly heated inclined circular tubes | p. 45 |
Laminar fluid flow and heat transfer in an enclosure with axial throughflow | p. 53 |
Convergence of numerical solutions of free convection equations obtained by direct method | p. 61 |
Natural convective heat transfer from a cooled cylinder in an enclosure containing water | p. 69 |
Mixed convection in open-ended inclined channels with discrete isothermal heating and containing baffles | p. 77 |
Numerical investigations of the influence of the inclination angle on impinging radial jet heat transfer | p. 83 |
Laminar flow forced convective heat transfer in a helical square duct with a finite pitch | p. 91 |
Numerical computation for the transient formation process of double diffusive natural convection of high and low Prandtl number fluids | p. 99 |
Laminar forced convective heat transfer from a heated moving surface to a contained gas flow | p. 107 |
Unsteady conjugated heat transfer analysis in low Reynolds pipe flow | p. 115 |
Numerical and experimental validation of thermo-hydraulic conditions in narrow channels | p. 123 |
Heat transfer at the outer surface of a rotating cylinder in the presence of axial flows | p. 131 |
Numerical simulations of flow and heat transfer of rectangular impinging jets in rows | p. 139 |
Numerical simulation of buoyant plumes using a spectral element technique | p. 147 |
Heat and mass transfer during polymerization process in a chemical reactor | p. 155 |
Application of compact high-order finite elements (CHOFE) to nonlinear convection-dominated problems | p. 165 |
Analysis of the blank mould - a transient heat transfer problem in glass forming | p. 175 |
Heat transfer from thermally developing flow of non-Newtonian fluids in rectangular ducts | p. 183 |
Correlation between grinding conditions and phase transformation of an alloy steel | p. 193 |
Heat transfer mechanisms in relation to laser surface melting of nitrided steel | p. 201 |
Predictions of melting or dissolution times with a 1D heat transfer simulation package | p. 209 |
A numerical model for the solidification process of a moving metal in a cooled pipe | p. 217 |
Numerical solution to two-phase Stefan problems by the heat balance integral method | p. 225 |
A front-tracking boundary element formulation for solidification/melting problems | p. 235 |
A numerical analysis of ice crystal growth on cold surfaces | p. 245 |
Numerical simulation of temperature distribution and seam forming in a narrow gap welding | p. 255 |
Numerical modelling of temperature field in guiding roll of continuous casting machine | p. 263 |
Modelling combined heat transfer, convection, solidification and stress deformation in castings | p. 271 |
Heat transfer and quality aspects for continuous solidification processes | p. 279 |
Adaptive finite element remeshing techniques in metal casting simulation with specific reference to industrial applications | p. 287 |
Numerical modelling of mould filling in casting processes | p. 295 |
A numerical evaluation of an inverse heat conduction procedure for determining contact resistance during metal forming | p. 303 |
A computational approach to the combustion of pulverized Greek lignite in a power station combustor | p. 313 |
Smolder spread through thin horizontal fuel layers | p. 323 |
Numerical temperature calculation for composite deck slabs exposed to fire | p. 331 |
The use of pressure loss as boundary condition of internal flows promoted by thermal buoyancy | p. 341 |
A numerical solution of heat transfer in intensive cooling processes under film boiling conditions | p. 349 |
Numerical study of turbulent forced convection in a vertical pipe with unsteady flow | p. 357 |
Coupling between thermal and electrodynamic models | p. 367 |
Computation of heat flux in a circuit-breaker electrode using temperature measurements | p. 375 |
Numerical computation of particle deposition onto a cone in a circular tube | p. 383 |
Numerical simulation of the thermal image generator | p. 391 |
2D and 3D finite element approach to natural convection in complex porous structures and to the related stability problems | p. 401 |
A numerical scheme for natural convection in a porous medium | p. 409 |
Natural convection between eccentric, horizontal porous cylinders | p. 417 |
Natural convection around a horizontal cylinder in a fluid-saturated porous media using Fourier series | p. 427 |
A numerical method for heat transfer in particulate material | p. 435 |
Sensitivity analysis and optimization by the BEM for volume integral functionals | p. 445 |
Accuracy and stability of a series solution for a horizontal thermal layer | p. 453 |
A new approach to 2D non-steady thermal problems | p. 465 |
Mixed numerical scheme solution for dropwise evaporative cooling | p. 473 |
Variable grid model for thermo-elastic deformation | p. 481 |
BEM for geothermal reservoirs | p. 489 |
Recent developments in MRM - solving problems with nonlinear source term | p. 497 |
Tidal motion - mass transfer in shallow waters | p. 513 |
Resolution of an identification problem by coupling stochastic and deterministic methods | p. 521 |
Numerical prediction of irregular cyclic variation of temperature in an underground metro system | p. 531 |
Pressure-swirl atomiser modelling | p. 539 |
The numerical modelling of heat transfer in turbine blades | p. 547 |
A numerical approach for thermally coupled fluid and solid problems in complex geometries | p. 555 |
A numerical method for forecasting the interaction of wind and forest fire - application in Cyprus | p. 563 |
Thermal radiation and heat insulation glass | p. 571 |
Modelling and numerical simulation of the simultaneous heat and mass transfer during food freezing and storage | p. 579 |
Authors' Index | p. 587 |
Table of Contents provided by Blackwell. All Rights Reserved. |
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.
Digital License
You are licensing a digital product for a set duration. Durations are set forth in the product description, with "Lifetime" typically meaning five (5) years of online access and permanent download to a supported device. All licenses are non-transferable.
More details can be found here.