Corrosion, Wear, Fatigue, and Reliability of

This volume provides a one-stop resource, compiling current research on the behavior and reliability of ceramic macro and micro scale systems. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Topics include Design and Testing Challenges for Ceramic Joints; Structural Design, Testing and Life Prediction of Monolithic and Composite Components; Mechanical Behavior, Design, and Reliability of Small Scale Systems; Environmental Effects on Mechanical Properties; and more. This is a valuable reference for researchers in ceramics engineering.

Jonathan Salem is a Materials Research Engineer at NASA Glenn Research Center in Cleveland, OH. He received a PhD in Mechanical engineering from the University of Washington and has authored or co-authored over 60 archival publications, over 70 proceedings publications, and four national and international standards on mechanics of ceramics. He is a fellow of American Society for Testing and Materials and received a NASA Manned Spaced Flight Awareness Award for work on ceramic bearings for the Space Shuttle Main Engine Turbo-pump. In 2004, he received the Richard M. Fulrath Award from the American Ceramic Society for development of technical standards for design of structural ceramics.

Preface	p. ix
Introduction	p. xi
Corrosion
Corrosion Resistance of Ceramics in Vaporous and Boiling Sulfuric Acid	p. 3
Thermocouple Interactions during Testing of Melt Infiltrated Ceramic Matrix Composites	p. 11
Oxidation Resistance of Pressureless-Sintered SiC-AIN-Re[subscript 2]O[subscript 3] Composites Obtained without Powder Bed	p. 21
Characterization of the Re-oxidation Behavior of Anode-Supported SOFCs	p. 33
Healing Behavior of Machining Cracks in Oxide-Based Composite Containing SiC Particles	p. 45
Effects of Oxidation on the Mechanical Properties of Pressureless-Sintered SiC-AIN-Y[subscript 2]O[subscript 3] Composites Obtained without Powder Bed	p. 57
Fiber Push Out Testing Before and After Exposure: Results for an MI SiC/SiC Composite	p. 65
New Ceramics Surface Reinforcing Treatment using a Combination of Crack-Healing and Electron Beam Irradiation	p. 75
Effect of Si[subscript 3]N[subscript 4] on the Instability of Li[subscript 2]O-Containing Celsian in the BAS/Si[subscript 3]N[subscript 4] Composites	p. 81
Fatigue, Wear, and Creep
Rolling Contact Fatigue Properties and Fracture Resistance for Silicon Nitride Ceramics with Various Microstructures	p. 91
Fretting Fatigue of Engineering Ceramics	p. 101
Investigation into Cyclic Frequency Effects on Fatigue Behavior of an Oxide/Oxide Composite	p. 111
Friction and Wear Behavior of AIBC Composites	p. 117
Creep of Silicon Nitride Observed In Situ with Neutron Diffraction	p. 131
Hydrothermal Oxidation of Silicon Carbide and Its Bearing on Wet Wear Mechanisms	p. 143
Reliability, NDE, and Fractography
Probabilistic Design Optimization and Reliability Assessment of High Temperature Thermoelectric Devices	p. 157
Development of a New Computational Method for Solving Inhomogeneous and Ultra Large Scale Model	p. 173
Optical Methods for Nondestructive Evaluation of Subsurface Flaws in Silicon Nitride Ceramics	p. 181
Fractographic Analysis of Miniature Theta Specimens	p. 189
Author Index	p. 201
Table of Contents provided by Ingram. All Rights Reserved.

What is included with this book?

The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.

The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.

FREE SHIPPING

Rent More, Save More! Use code: BBRENTAL

5% off 1 book, 7% off 2 books, 10% off 3+ books

Corrosion, Wear, Fatigue, and Reliability of Ceramics, Volume 29, Issue 3

Summary

Author Biography

Table of Contents

Supplemental Materials