Guidelines for Laboratory Design Health, Safety, and Environmental Considerations
, by DiBerardinis, Louis J.; Baum, Janet S.; First, Melvin W.; Gatwood, Gari T.; Seth, Anand K.
- ISBN: 9780470505526 | 0470505524
- Cover: Hardcover
- Copyright: 4/8/2013
There have been significant changes in laboratory design criteria and many advances in the health and safety aspects of lab design in recent years. Now completely updated and revised, this fourth edition of Guidelines for Laboratory Design: Health and Safety Considerations includes up-to-date health regulations, safety references and environmental considerations for use in laboratory design, a new chapter on Sustainable Design, and information on the designing green laboratories. This resource provides architects, design and consulting engineers, and students with the most current guidelines available.
LOUIS J. DiBERARDINIS, BS, MS, CIH, CSP, is the Director of Environment, Health, and Safety at MIT. He is a visiting lecturer at Harvard University School of Public Health and Adjunct Professor at the University of Massachusetts Lowell in the Department of the Work Environment. He received his BS in chemical engineering from Northeastern University and an MS in industrial hygiene from Harvard University.
JANET S. BAUM, BS, MArch, AiA, currently teaches part-time at Harvard University School of Public Health and at both the Graduate School of Architecture and Urban Design and the Institute of Public Health, Washington University in St. Louis. She earned her BS in architectural sciences at Washington University in St. Louis and her master of architecture at Harvard University Graduate School of Design.
The late MELVIN W. FIRST, ScD, CIH, PE, was a researcher and professor of environmental health Engineering at the Harvard School of Public Health for almost sixty years and was actively involved in research until a week before his death.
GARI T. GATWOOD, BSME, CSP (retired), is a consultant in safety engineering. He has forty years of safety experience in missile defense, commercial chemicals, laboratories, and university programs. He holds a degree in mechanical engineering from the Missouri School of Mines and Metallurgy in Rolla, Missouri.
Anand K. Seth, BS, MS, PE, CEM, CPE, is currently an Engineering Principal in Cannon Design, an international architectural/engineering firm. Seth worked at Massachusetts General Hospital as director of engineering and at Harvard University. He holds a master of science in mechanical engineering from the University of Maine and has done postgraduate work at other universities.
TBD Dedication
TBD Acknowledgments
TBD Preface
TBD Abbreviations
TBD Units
TBD Introduction
PART IA COMMON ELEMENTS OF LABORATORY DESIGN Introduction
Chapter 1 Building Considerations 1.1 Guiding Concepts
1.2 Building Layout
1.3 Guiding Principles for Building Heating, Ventilating, and Air-Conditioning Systems
1.4 Guiding Concepts for Laboratory Building Loss Prevention, Industrial Hygiene, and Personal Safety
1.5 Miscellaneous Services
Chapter 2 Laboratory Considerations
PART IB COMMON ELEMENTS OF RENOVATIONS
Introduction
Chapter 3 Renovations: Building Considerations
3.1 Guiding Concepts
3.2 Building Layout
3.3 Heating, Ventilating, and Air-Conditioning Systems
3.4. Loss Prevention, Industrial Hygiene, and Personal Safety
3.5 Miscellaneous Services
Chapter 4 Renovations: Laboratory Considerations
4.1 Guiding Concepts
4.2 Laboratory Layout
4.3 Heating, Ventilating, and Air-conditioning systems
4.4 Loss Prevention, Industrial Hygiene, and Personal Safety
PART II DESIGN GUIDELINES FOR A NUMBER OF COMMONLY USED LABORATORIES
Introduction
Chapter 5 General or Analytical Chemistry Laboratory
5.1 Description
5.2 Laboratory Layout
5.3 Heating, Ventilating, and Air-Conditioning
5.4 Loss Prevention, Industrial Hygiene, and Personal Safety
5.5 Special Requirements
Chapter 6 High-Toxicity Laboratory
6.1 Description
6.2 Laboratory Layout
6.3 Heating, Ventilating, and Air-Conditioning
6.4 Loss Prevention, Industrial Hygiene, and Personal Safety
6.5 Special Requirements
Chapter 7 Nanotechnology Laboratories
7.1 Description
7.2 Laboratory Layout
7.3heating, Ventilating, and Air-Conditioning
7.4 Loss Prevention, Industrial Hygiene, and Personal Safety
Chapter 8 Engineering Laboratories
8.1 Description
8.2 Engineering Disciplines and Some of Their Most Common Laboratory Types
8.3 Wind Tunnel Laboratory
8.4 Jet and Rocket Propulsion Laboratory
8.5 Hydraulics Laboratory
8.6 Material Analysis and Testing Laboratory
8.7 Electrical Circuits, Motors, and Generators Laboratory
8.8 Foundry Laboratory
8.9 Internal Combustion and Gas Turbine Engine Laboratory
Chapter 9 Pilot Plant: Chemical, Engineering, and Biological
9.1 Description
9.2 Pilot Plant Layout
9.3 Heating, Ventilating, and Air-Conditioning
9.4 Loss Prevention, Industrial Hygiene, and Personal Safety
9.5 Special Requirements
Chapter 10 Physics Laboratory
10.1 Description
10.2 Laboratory Layout
10.3 Heating, Ventilating, and Air-Conditioning
10.4 Loss Prevention, Industrial Hygiene, and Personal Safety
10.5 Special Requirements
Chapter 11 Controlled Environment Room: Hot or Cold
11.1 Description
11.2 Laboratory Layout
11.3 Heating, Ventilating, and Air-Conditioning
11.4 Loss Prevention
11.5 Special Requirements
Chapter 12 High-Pressure Laboratory
12.1 Description
12.2 Laboratory Layout
12.3 Heating, Ventilating, and Air-Conditioning
12.4 Loss Prevention, Industrial Hygiene, and Personal Safety
12.5 Special Requirements
Chapter 13 Radiation Laboratory
13.1 Description
13.2 Laboratory Layout
13.3 Heating, Ventilating, and Air-Conditioning
13.4 Loss Prevention, Industrial Hygiene, and Personal Safety
13.5 Special Considerations
Chapter 14 Biosafety Laboratory
14.1 Description
14.2 Laboratory Layout
14.3 Heating, Ventilating, and Air-Conditioning
14.4 Loss Prevention, Industrial Hygiene, and Personal Safety
14.5 Special Requirements
Chapter 15 Clinical Laboratories
15.1 Description
15.2 Laboratory Layout
15.3 Heating, Ventilating, and Air-Conditioning
15.4 Loss Prevention, Industrial Hygiene, and Personal Safety
Chapter 16 Teaching Laboratory
16.1 Description
16.2 Laboratory Layout
16.3 Heating, Ventilating, and Air-Conditioning
16.4 Loss Prevention, Industrial Hygiene, and Personal Safety
Chapter 17 Gross Anatomy Laboratory
17.1 Description
17.2 Laboratory Layout
17.3 Heating, Ventilating, and Air-Conditioning
17.4 Loss Prevention, Industrial Hygiene, and Personal Safety
17.5 Security
Chapter 18 Pathology Laboratory
18.1 Description
18.2 Laboratory Layout
18.3 Heating, Ventilating, and Air-Conditioning
18.4 Loss Prevention, Industrial Hygiene, and Personal Safety
18.5 Special Requirements
Chapter 19 Autopsy Laboratory
19.1 Description
19.2 Laboratory Layout
19.3 Heating, Ventilating, and Air-Conditioning
19.4 Loss Prevention, Industrial Hygiene, and Personal Safety
Chapter 20 Morgue Facility
20.1 Description
20.2 Laboratory Layout
20.3 Heating, Ventilating, and Air-Conditioning
20.4 Loss Prevention, Industrial Hygiene, and Personal Safety
Chapter 21 Open or Team Research Laboratory
21.1 Description
21.2 Laboratory Layout
21.3 Heating, Ventilating, and Air-Conditioning
21.4 Loss Prevention, Industrial Hygiene, and Personal Safety
21.5 Special Considerations
Chapter 22 Animal Research Laboratory
22.1 Description
22.2 Laboratory Layout
22.3 Heating, Ventilating, and Air-Conditioning
22.4 Loss Prevention, Industrial Hygiene, and Personal Safety
22.5 Special Requirements
Chapter 23 Microelectronics and Cleanroom Laboratories
23.1 Description
23.2 Laboratory Layout
23.3 Heating, Ventilating, and Air Conditioning
23.4 Loss Prevention, Industrial Hygiene, and Personnel Safety
Chapter 24 Printmaking Studio
24.1 Description
24.2 Print Studio Layout
24.3 Heating, Ventilating, and Air-Conditioning
24.4 Loss Prevention, Industrial Hygiene, and Personal Safety
PART III LABORATORY SUPPORT SERVICES
Introduction
Chapter 25 Imaging and Photographic Facilities
25.1 Introduction
25.2 Imaging and Photographic Facility Layouts
25.3 Heating, Ventilating, and Air-Conditioning
25.4 Loss Prevention, Industrial Hygiene, and Personal Safety
25.5 Special Requirements
Chapter 26 Support Shops
26.1 Description
26.2 Layout
26.3 Heating, Ventilating, and Air-Conditioning
26.4 Loss Prevention, Industrial Hygiene, and Personal Safety
26.5 Special Requirements
Chapter 27 Hazardous Chemical, Radioactive, and Biological Waste Handling Rooms
27.1 Guiding Concepts
27.2 Layout
27.3 Heating, Ventilating, and Air-Conditioning
27.4 Loss Prevention, Industrial Hygiene, and Personal Safety
27.5 Special Requirements
Chapter 28 Laboratory Storerooms
28.1 Description
28.2 Layout
28.3 Heating, Ventilating, and Air-Conditioning
28.4 Loss Prevention, Industrial Hygiene, and Personal Safety
28.5 Special Requirements
PART IV HVAC SYSTEMS
Introduction
Chapter 29 HVAC Systems
29.1 Description
29.2 Air-Conditioning Systems
29.3 HVAC System Design and Description
29.4 System Descriptions and Strategies
29.5 Humidification and Dehumidification
29.6 Space Pressure Control
29.7 Automatic Control System
Chapter 30 FANS
30.1 FAN Terminology
30.2 Exhaust FAN Specifications
30.3 Atmospheric Dispersion
30.4 FAN Laws
30.5 FAN Selection
30.6 FAN Performance
Chapter 31 Air Cleaning
31.1 Introduction
31.2 Air-Cleaning Equipment for Laboratories
Chapter 32 Laboratory Hoods and Other Exhaust Air Contaminant-Capture Facilities And Equipment
32.1 Introduction
32.2 Conventional Bypass Chemical Fume Hoods
32.3 Auxiliary Air Chemical Fume Hoods
32.4 Perchloric Acid Fume Hoods
32.5 Hoods for Work With Radioactive Materials
32.6 Variable Air-Volume Hoods
32.7 High-Performance Hoods
32.8 Gloveboxes
32.9 Biological Safety Cabinets
32.10 Capture (Exterior) Hoods
32.11 Ductless Hoods
32.12 Performance Tests
Chapter 33 Exhaust Air Ducts and Accessories
33.1 Introduction
33.2 Exhust Duct Considerations
33.3 Exhust System Classification
33.4 Duct Accessories
Chapter 34 Variable-Air-Volume Systems
34.1 Introduction
34.2 Vav Hoods
34.3 Good Design Practices for Vav Systems
34.4 Variable-Volume Exhaust System Operational Concept
34.5 Vav System Controls and Components
34.6 Vav System Fan Controls and Components
34.7 Vav System Duct Configurations
Chapter 35 Energy Conservation
35.1 Introduction
35.2 Recent Trends
35.3 Exhaust Ventilation for Contamination Control
35.4 Lighting
35.5 Thermal Insulation
35.6 Humidity Control
35.7 Evaporative Cooling
35.8 Water Conservation
35.9 Efficient Operating Strategies
PART V ADMINISTRATIVE PROCEDURES
Introduction
Chapter 36 Project Execution and Bidding Procedures
36.1 Guiding Concepts
36.2 Implementation
36.3 Bid Form
36.4 Contract
36.5 Change Orders
36.6 Construction Inspections
36.7 Punch List
36.8 Additional Testing, Acceptance, and Commissioning
36.9 Beneficial Occupancy
36.10 Final Acceptance and Commissioning
Chapter 37 Commissioning and Final Acceptance Criteria
37.1 Guiding Concepts
37.2 Design, Construction, and Preoccupancy Checklists
37.3 Heating, Ventilating, and Air-Conditioning
37.4 Loss Prevention, Industrial Hygiene, and Personal Safety
37.5 Project Commissioning
Chapter 38 Sustainable Laboratory Design
38.1 Introduction
38.2 Laboratory Construction Materials
38.3 Heating, Ventilating, and Air-Coniditioning
38.4 Loss Prevention, Industrial Hygiene, and Personal Safety
38.5 Miscellaneous Services
38.6 Lighting
38.7 Submetering
38.8 Additional Background Material
PART VI APPENDICES
A Emergency Showers
B Emergency Eyewash Units
C Signs
D Stack Design
E Matrix
References
Index
What is included with this book?
The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.
The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.
Please wait while the item is added to your bag...
Review
Flag Review
×
Digital License
You are licensing a digital product for a set duration. Durations are set forth in the product description, with "Lifetime" typically meaning five (5) years of online access and permanent download to a supported device. All licenses are non-transferable.
More details can be found here.