Surface Modification Technologies: 14th

Note: Supplemental materials are not guaranteed with Rental or Used book purchases.

ISBN: 9781861251282 | 1861251289
Cover: Hardcover
Copyright: 8/7/2001

Rent

(Recommended)

$148.32

Term

Due

Price

Semester

Dec 16

$148.32

Quarter

Nov 7

$140.90

Short Term

Oct 8

$133.49

*This item is part of an exclusive publisher rental program and requires an additional convenience fee. This fee will be reflected in the shopping cart.
Buy New

Usually Ships in 3-5 Business Days

$157.61

Supplemental Materials

Foreword
Surface Modification in Aerospace Applications	p. 3
In Situ Formation of Titanium Carbide by Reactive Plasma Spraying with Elemental Titanium Powder	p. 10
A Comparative Study of Mechanical Properties and Residual Stress Distributions of Copper Coatings Obtained by Different Thermal Spray Processes	p. 16
Damage Progression in Thermal Barrier Coatings During Four - Point Bend Tests with Acoustic Emission Monitor	p. 24
A Study of the Strength of Spray Coated Layer by Cross Sectional Electron Microscopy	p. 31
A Comparative Study of Different Plasma Sprayed Coatings Applied to Railway Disc Brakes	p. 34
Optimization and Monitoring of the Production of Thermal Barrier Coatings	p. 39
Benefits of Surface Preparation by Laser for Thermal Sprayed Coatings	p. 45
Fabrication of TiO[subscript 2] Photocatalytic Coating by Thermal Spray Process	p. 51
Indentation Fracture Toughness and Interfacial Indentation Tests Associated with Acoustic Emission on WC-Co Coated Specimens	p. 57
Fatigue Processes in Bodies with Surface Coatings	p. 64
Laboratory Evaluation of Hot Erosion Resistance of Six Thermal Sprayed Coatings	p. 71
Vacuum Plasma Sprayed WC-12% Co Coatings: Optimization of Spraying Parameters and Subsequent Laser Treatment	p. 78
Optical Properties of Al Film Deposited on Polymer	p. 87
Slurry and Thermal Spray Coatings for Protection of New Generation Steam Engine Components	p. 92
Surface State Modifications in Powder Products Induced by a Spray-Coating Technique	p. 100
Relationship Between Dilution and Solidification Cracking in PTAW Ni-Base Superalloy Overlays	p. 104
A Novel Friction Thermomechanical Process for Surface Modification of Aluminum Castings	p. 113
Characterization and Modelling of Multilayer Ti-Based Coating	p. 117
Electrolytic Deposits on Stainless Steel as High Temperature Coatings	p. 123
Investigation of Ceramic Sol-Gel Thin Films for Wet Corrosion Protection of Mild Steel	p. 127
Need for Environmentally Friendly Surface Modification Technology in the Japanese Automotive Industry	p. 135
Development of Bioceramic Composites: Processing Solutions and In-Vitro Evaluations	p. 141
Wear of Ultra High Molecular Weight Polyethylene Sliding against a CoCrMo Coating Applied by Physical Vapor Deposition	p. 148
Physico-Chemical and Mechanical Approaches to the Dentin-Resin Adhesive Interface	p. 155
Surface Quality of Master Screw Dental Implant	p. 164
Suspension Plasma Sprayed Hydroxyapatite Nano-Powder for Biomedical Application	p. 169
Ceramographic Analysis of Ceramo - Metal Bonding Interfaces	p. 177
A Nanoindentation Study of PVD WC/C Coatings Supported by Cross-Sectional Electron Microscopy Observations	p. 183
Effect of a Ni Interlayer on the Corrosion Behavior of CrN PVD Coating Deposited onto Plastic Mold Steels	p. 190
Structure of Diamond-Like Carbon Films Obtained by PECVD: XPS, X-Rays Reflectometry and Hardness Measurements	p. 197
Application of Surface Modified Silica Thin Films to Biosensors	p. 202
Surface Treatments and Coatings in the Steel-Making Industry: From Metallurgy to Processing	p. 211
Changes in Structure and Properties of AlN Thin Films due to Surface Oxidation	p. 223
Carbo-Nitride Thin Films and Nanofibers Synthesized by HF-CVD	p. 227
Effect of Various Plasma Nitriding Procedures on Surface Characteristics of P/M Ledeburitic Tool Steels	p. 233
Characterization of PVD Ni Coatings Deposited at Various Conditions	p. 240
Challenges and Opportunities in Surface Engineering	p. 247
Correlations Between Surface Modification and Tribological Performance of Brake Pads	p. 252
Development of Novel Fe-Cr-C/NbC Composite Materials for Wear Resistant Coatings Using a Laser Rapid-Alloy-Prototyping Technique	p. 257
Dose Rate Influence on the Microstructure of Chromium Steels Subjected to Low-Energy Nitrogen Ion Implantation	p. 262
Effect of Coatings on Mechanical Properties and Fretting Fatigue Strength of a Titanium Alloy in Cryotechnical Environment	p. 268
Wear Behavior of Colored Stainless Steel	p. 274
Wear Analysis of Coated Carbide Tools when Machining Nickel Base, Inconel 718 Alloy	p. 279
Wear Modelling of Contact Plan/Plan Between Graphite and Titanium Alloy	p. 287
Wear Criterion for Cold Forging Tool	p. 294
Surface Modification of a FeCrAlY-Alloy by Ion Implantation and Oxidation for Potential Implant Applications	p. 299
Functionally Graded Materials Produced by Laser Cladding: A Novel Approach	p. 311
Improvement of Adhesive Properties of Polymers After Excimer Laser Irradiation	p. 317
Properties and Applications of Coatings Deposited by Laser Beam	p. 324
WC-Co Plasma Sprayed Coatings Partially Re-fused with Laser	p. 333
Modeling of Temperature Fields in Graphite Target at Pulsed Laser Deposition of CN[subscript x] Films	p. 338
Laser Treatment of BN Pre-Coated Steels: Correlation of Hardness and Microstructure	p. 345
Surface Alloying of Ceramic Powders on Ferrous Substrates Using Concentrated Solar Energy	p. 353
An Experiment Design Technique for the Approximation of Process Parameters in Laser Surface Hardening	p. 360
Corrosion Behavior of HVOF Sprayed Nickel Alloy Coatings in a Seawater Environment	p. 369
Improvement of Fatigue Strength of Squeeze Cast Al Alloy by Shot Peening	p. 375
Influence of Laser-peening and Shot-peening on the Pitting Corrosion Behavior of 316L Steel Acoustic Emission Monitoring of the Pit Propagation	p. 381
Surface Modification Issues in Arts	p. 391
Alchemy and Surface Treatments in Antiquity	p. 404
Characterization of Surface States on Patrimonial Works of Art	p. 412
Hybrid Sol-Gel Clear Coatings for Decoration Brass Profiles	p. 417
Raman Studies on Surface of Artefacts	p. 422
Study on the Discoloration of Pigments Induced By Laser Irradiation	p. 426
Surface Modification Process on European Union Bronze Reference Materials for Analytical Studies of Cultural Artefacts	p. 431
Plasma Treatment of Artefacts	p. 436
Characterisation and Location of the Original Surface of Corroded Metallic Archaeological Objects	p. 442
Influence of Hydrogen Content and Carbon Hybridizations on Optical Properties of A-C:H Thin Films Obtained by PECVD	p. 449
New Plasma Equipment for Supersonic Spraying	p. 454
A Novel Structure with Modified Surface Characteristic for an AlN Substrate	p. 459
Characterization of Sputtered Ceramic Coatings	p. 465
Surface Finishing and Modification in Electronics: Recent Trends and Targets in Japanese Electronics Packaging Technology	p. 475
Hardening Behavior Law for a TiN Coated Tool Steel	p. 482
Mechanical Behavior Modeling of Plasma Sprayed Tungsten Coating	p. 488
Modelling the Thermal Conductivity of Plasma Sprayed TBCs	p. 495
2D Finite Element Simulation of Thermal Stresses in Progressively Deposited Plasma-Sprayed Coatings	p. 503
Thermo Mechanical Modeling of Spray Coating Process Based on Finite Element Method and Molecular Dynamics	p. 509
Preparation and Characterization of Biocompatible Vitroceramic - Metal Systems with Applications in Medicine	p. 517
Multiplex IBAD/PACVD Technology	p. 522
In-Situ XRD Analyses During Isothermal Oxidation of Yttrium Coated 304L at 1000[degree]C	p. 526
Microstructural Characterization of Superficial Zones on Brake Pads	p. 530
Modification of the TiAlNb Surface at High Temperature	p. 535
Models for the Impedance Behavior of Poly (2-Mercaptobenzimidazole) Protective Coatings on Copper-Zinc Alloys	p. 540
Influence of Ion-Bombardment on the Relation Between Lattice Spacing and Sin[superscript 2][Psi]	p. 545
Plasma Surface Applications Using the Broad Plasma Jet of an Innovative Plasma Torch	p. 551
Wear Resistance of Thermal or Thermochemical by Treated Cast Iron	p. 555
Microstructural Analysis of Rapid Solidification High Speed Tool Steel	p. 561
HVOF WC-Co Coatings for Screw Pumps in Crude Oil Flow: A Case History	p. 565
Ceramics Coatings on Si[subscript 3]N[subscript 4]-Al[subscript 2]O[subscript 3]-TiC-Y[subscript 2]O[subscript 3] Composites Intended for the Edges of Cutting Tools	p. 569
Surface Tension of Molten AlSi 12% in Ultrasonic Field	p. 572
Alloy and Metallic Coatings for High Temperature Applications	p. 575
Morphological Evaluation of Human Osteoblasts Cultivated on Pure Titanium and Titanium Coated with Hydroxyapatite	p. 579
Surface Modification and High Temperature Oxidation Resistance Induced by Yttrium Implantation in Pure Iron and Various Steels	p. 582
Comparative Erosion Tests of Ni-P Electroless Coating	p. 590
Determination of Residual Stresses on Yttrium Implanted Steels	p. 595
A New Approach to the Visualization of the Interconnected Defects in Thermal Sprayed Ceramic Coatings	p. 600
Wear Behavior of Cermet Coatings on Steel Formed by Three Different Surface Treatment Techniques	p. 604
Laser Cleaning of Oxidized Fe-alloys	p. 613
Laser Melt Injection of SiC Particles in Al	p. 619
Preparation and Properties of Nitrogen Containing Carbon Films by Hot Carbon Filament CVD	p. 624
Deformed Surface Layer of Ground Tungsten Carbides	p. 627
Influence of HVOF Parameters on Corrosion Resistance and Microstructure of Thermal Sprayed NiWCrBSi Coatings	p. 633
Wear Behavior of a Silicon Carbide Enriched Composite Electroless Nickel	p. 637
Table of Contents provided by Blackwell. All Rights Reserved.

FREE SHIPPING

Surface Modification Technologies: 14th

Table of Contents

Supplemental Materials